Sony CMT-SBT20B - Pairing Additional Devices

25
GB
Listening to music through a BLUETOOTH connection
CMT-SBT20B
4-582-332-11(1)
Pairing additional devices
This system can pair with and store pairing
information for up to 8 BLUETOOTH devices.
If the device does not have an NFC
function:
1 Press BLUETOOTH MENU

and use /

to select “PAIRING”, then press

.
2 Follow steps 2-3 in “Pairing with a device
that does not have an NFC function”
(page22) to perform pairing.
To perform the pairing by using a button
on the unit
1 Press FUNCTION

repeatedly to
select “BT AUDIO.”
2 Press and hold FUNCTION

until the
(BLUETOOTH) indicator

starts to
flash quickly.
3 Follow steps 2-3 in “Pairing with a
device that does not have an NFC
function” (page 22) to perform
pairing.
Tip
• To make a BLUETOOTH connection with a newly-
paired device while the system is connected to a
different device, first terminate the BLUETOOTH
connection with the device currently being used,
and then make the connection with the new
device.
If the device has an NFC function:
Follow the procedure in “Pairing with
a device that has an NFC function”
(page23) to perform pairing for the new
device.