Sony CRE-E10 - Page 41

41
LED
Charger LED
Blinking red
An error in the charger has occurred.
●
Take the hearing aids out of the charger and
disconnect the charger from the power supply.
●
Reconnect the charger to the power supply and
re-insert the hearing aids in the charging cups.
If the LEDs are 󰘵ill blinking red.
●
Take the hearing aids out of the charger and
disconnect the charger from the power supply.
●
Contact your cu󰘵omer service for support.
For an overview of the hearing aids’ charging 󰘵atus, refer to the
section “Charging”.