10
USB cradle
A Camera connector
B USB ON/OFF switch
C
(USB) jack (76)
D DC IN connector (11)
E A/V OUT (MONO) jack (37)
3
4
5
How to install/remove your camera
How to install
Install the camera as illustrated below.
• Make sure the camera is securely installed to
the USB cradle.
How to remove
Grasp the camera and the USB cradle as
illustrated below and remove the camera
with the lens portion closed.
• Be sure to turn off the camera before you install
the camera to the USB cradle or remove the
camera from the USB cradle.
• During the USB connection, do not
switch the USB ON/OFF switch or not
remove the camera from the USB
cradle. The data may be corrupted.
When you cancel the USB connection,
see “P To cancel the USB connection”
(page 77).
When you remove the AC power adaptor
from the USB cradle, hold the DC plug
itself and the USB cradle as illustrated
below and remove the cable.
DC plug
To Next Page
Loading...
