12
Charging the battery pack
(continued)
, Connect the power cord (mains
lead) to the AC power adaptor
and to a wall outlet (wall
socket).
4
Power cord
(mains lead)
AC power adaptor
2 To a wall outlet
(wall socket)
1
, Install the camera to the USB
cradle.
Install the camera as illustrated above.
Charging starts, and the /CHG lamp lights.
When the /CHG lamp goes out, charging is
finished.
5
/CHG
/CHG lamp
• When charging the battery pack, make
sure the camera is not turned on
(page 16).
• Make sure the camera is securely installed to
the USB cradle.
Charging the battery pack only using
the AC power adaptor
You can charge the battery pack without the
USB cradle, such as during your travels.
Connect the DC plug of the AC power
adaptor to the camera with v mark facing
down as illustrated below.
Power cord
(mains lead)
AC power adaptor
DC plug
Multi connector
To Next Page
Loading...
