Sony Cyber-shot DSC-F77 - Still Image Editing; Protecting Images (Protect); On the Index (Nine-Image) Screen; On the Single Screen

61
Still image editing
Protecting images
– Protect
MODE dial:
To prevent accidental erasure of an
important image, you can protect it.
On the single screen
a Set the MODE dial to .
b Display the image you want to
protect with b/B.
c Press MENU.
The menu appears.
d Select [PROTECT] with b/B,
then press z.
The image currently being displayed is
now protected, and the - (Protect)
mark is indicated on the screen.
e To protect other images,
display the image you want to
protect with b/B, then press
z.
To cancel the protection
In Step 4 or 5, press z again. The -
mark disappears.
On the Index (nine-image)
screen
a Set the MODE dial to , press
the SMART ZOOM W button
once to switch to the Index
(nine-image) screen.
b Press MENU.
The menu appears
c Select [PROTECT] with b/B,
then press z.
d Select [SELECT] with b/B,
then press z.
e Select the image you want to
protect with v/V/b/B, then
press z.
The green - (Protect) mark is
indicated on the selected image.
MODE dial
Control button
MENU
60
min
640
101
2/9
OK BACK/NEXT
PROTECT
EXIT
TO NEXT
MENU
MOVESELECT
Still
i
mage e
diti
ng