I
Cannot insert the date or print images in the index mode.
• The printer does not provide these functions. Consult tile printer manulacturcr as to _hether
tile printer provides these fimctions or not.
• The date may not be inserted in the index mode depending on the printer. Consuh the printer
mantlfactu Fur.
" is printed on the date-inserted part of the image.
• Images that do not have the recording data cannot be printed _ith the date inserted. Set IDate]
to [Off] and print the image again (page 87).
Cannot select the print size.
• Consult the printer manufacturer as to x_hether the printer can provide the desired size.
Cannot print the image at the size selected.
• If you haw" changed the paper size after having the USB cable connected, then connect the
printer again.
• The print setting of the camera differs from that of the printer. Change the setting of either Ibe
camera (page 87) or the printer.
Cannot operate the camera after canceling printing.
• Wait for a while as the printer is carrying out Ibe cancellation. It may take some time
depending on the printer.
Your camera does not work.
•Use the type of batteries you can use _ith this camera (page 110).
• The battery le'_el is low (The T_\_indicator appears). Charge the batteries (_ stu_ 1 in "Read
This Fir,st").
The power is on, but the camera does not work.
•The builtqn microcomputer is not _ orking properly. Remove the batteries, andthen, afler one
minute, insert the batteries and turn on the camera.
Cannot identify an indicator on the screen.
• See page 22.
The lens gets fogged.
•Moisture condensation has occurred. Turn off the camera and lea',e it l_r about an hour bel_re
using it (page 112).
103
To Next Page
Loading...
