1
To set the manual focus
@ Press the FOCUS button repeatedly to select _.
Tile manual focus bar appears.
Peaking level
- Manual focus bar
Focus range 2 to 90 cm:
Focus range 90 cm to oo :
2 5 10 90cm
0.9 2 5m
lm ! NCO
Focus indicator
(yellow: adjustable/white: fixed)
@ Set tbe bar to tbe desired distance with _1/1_ on the control button.
• If _ flashes, il indicales lhe limilalion of locus adjustment.
• Using lhe Expanded locus flmcfion (page 60), tile image on the screen is expanded double to lbcus on
easily (The delault setting).
@ Press 0. @ changes from yellow to white. To set again, press • again.
• Distance setting inlorlnalion ill nlanual locus is approxilnale. If you point tile lens tip or down, the error
increases.
• The distance selection is linlited according to the zoonl scaling or the selling of file [Conversion Lens].
• Once you change a locus melhod, the distance of file manual fl_cus you set up is cleared.
"_;"Enhancing the outline of the subject that is visually in focus (Peaking)
Tile outline of tile subject Oll tile screen is enhanced using blue Ior easier Iocusing.
Set tile peaking level with &/V on the conllx)l button while setting the manual k)cus.
(_ : The dclhult setting)
Peaking High Sets the peaking level higb.
Peaking Low Sets the peaking level low.
PeakingOff Does not use the peaking function.
411
To Next Page
Loading...
