|
Fordetailsontheoperation_ page43
Selects the frame interval in the Multi Burst tnode (page 41).
1/7.5(1/7.5")
1/15(1/15")
1/30(1/30")
• Select Multi Burst with tile [_/BRK button first, set tile desired
siting tbr [Interval]. When you select a function other than
Multi Burst, this flmclion is unavailable (page 41).
Atljusts the amottnt of flash light.
1} +2.0EV Toward +: Makes tile flash level higher.
0EV The amount of flash light that the camera a(ljusts
automatically.
g -2.0EV Toward : Makes the flash le_el lower.
• The flash level can be set in 1/3 EV increments.
• The value is not displayed on the screen. It is indicated as + or .
• To change flash mode _ ;tU_ 5 in 'R_ld Thi; i_;l"
• If tile sub.iect is too bright or clark, this adjusllnenI may have no effect,
• When the flash mode is sel 1o (_t) (Flash lorced oil), you cannot adjust the flash level.
Atljusts the contrast of the image.
+ ((_) Toward +: Enhances the contrast.
,_ Normal
-((_) Toward : Reduces the contrast.
At!justs the sharpness of the image.
+ C_) Toward +: Sharpens the image.
Normal
- ([_1) Toward : Softens the image.
48
See page 56.
To Next Page
Loading...
