|
Fordetailsontheoperation_ page56
Sets the video signal output according to the TV color system of the connected video
equipment. DiflL'rent countries and regions use diflcrent TV color systems. If you want to
view images on a TV screen, check page 92 for the TV color system of the country or regkm
where the camera is used.
NTSC Sets the video output signal to NTSC mode (e.g., for the
USA, Japan).
PAL Sets the video output signal to PAL mode (e.g., for Europe).
Sets the date and time.
OK Select [OK] with • on the control button, and press O. Then,
perform the procedure explained in "Set the clock" (_ step 2
irl "Read This Fi_:_t').
Cancel Cancels setting the clock.
68
To Next Page
Loading...
