Sony Cyber-shot DSC-H5 - Stage 2: Connecting the camera and your computer; Stage 3-A: Copying images to a Computer

/
@ To the _ (USB)
jack
USB cable
@ To the USB jack
--1
• With Windows XP, die AumPlay wizard
appears on the desktop.
"USB Mode Mass Storage" appears on the
screen of the camera.
USB Mode ]
Mass Storage
_ Access
indicators"-
Whmt a USB connection is established for
the first time, your computer automatically
runs a program to recognize the camera.
Wait for a while.
* During conmmnication, the access indicators
turn red, Do nol operate tile conlpllter ilnli] tile
indicators turn while,
• If"USB Mode Mass Storage" does nol appear,
sel [USB Connect] to [Mass Smragel (page 67).
• For Windows 2b_10/Me. lk_llowthe procedure
explained in "Stage 3-B: Copying images to a
Compuler" on page 74.
• For Windows XP. when the wizard screen does
not appear automatically, h!llow the procedure
explained in "Stage 3-B: Copying images to a
Compuler" on page 74.
This section describes an example of
copying images to a "My [)ocmnents"
li_lder.
4
/ After making a USB connection in
Stage 2, click [Copy pictures to a
folder on my computer using
Microsoft Scanner and Camera
Wizard] -, [OK] as the wizard
screen appears automatically on
the desktop.
O
The "Scalmer and Camera Wizard"
screen appears.
2 Click [Next].
The images saved on the "Mmnory
Stick Duo" of the camera appear.
• If no "Memory Stick Duo" is in_rted.
images in the internal memory appear.
73