Cyber-shot User Guide
PrintSearch
Before Use
Shooting
Viewing
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions/About this camera
Contents list
Top page > Using with your computer > Importing images to a computer > To disconnect your camera
from the computer
To disconnect your camera from the computer
Perform the procedures from step 1 to 2 below before:
Disconnecting the cable.
Removing a memory card.
Turning off the camera.
1. Click the disconnect icon (
) on the tasktray.
With Windows 7, click first, then click .
2. Click [Safely remove USB Mass Storage Device].
Notes
Drag and drop the icon of the memory card or the drive icon to the “Trash” icon beforehand when
you use a Mac computer, and the camera is disconnected from the computer.
The disconnect icon may not appear when you use a Windows 7 computer. In this case, you can
disconnect the camera from the computer without following the above steps.
Back to top
Copyright 2012 Sony Corporation
To Next Page
Loading...
