Help Guide | PAL/NTSC Selector
http://www.sony-asia.com/microsite/cybershot_userguides/DSC-RX10/eng/contents/TP0000227261.html[24/11/2013 16:08:13]
Digital Still Camera
DSC-RX10
PAL/NTSC Selector
Plays back movies recorded with the product on a PAL/NTSC system TV.
1. MENU →
(Setup) → [PAL/NTSC Selector] → [Enter]
Note
This function is provided with 1080 50i-compatible devices only. It is not provided with 1080
60i-compatible devices. The 1080 50i-compatible devices have a “50i” mark on the bottom of
the product.
If you insert a memory card that has previously been formatted with the PAL system, a
message telling you that you must re-format the card appears. When you record using the
NTSC system, re-format the memory card or use another memory card.
When the NTSC mode is selected, the “Running on NTSC.” message always appears on the
start-up screen each time you turn the product on.
Notes on use
4-477-079-12(1)
Copyright 2013 Sony Corporation
Help Guide
How to Use
To Next Page
Loading...
