Help Guide | Send to Computer
http://www.sony-asia.com/microsite/cybershot_userguides/DSC-RX10/eng/contents/TP0000226698.html[24/11/2013 16:10:12]
Digital Still Camera
DSC-RX10
Send to Computer
You can transfer images stored in the product to a computer connected to a wireless access
point or wireless broadband router and easily make backup copies using this operation. Before
starting this operation, install “PlayMemories Home” on your computer and register the access
point on the product.
1. Start your computer.
2. MENU →
(Wireless) → [Send to Computer].
Note
Depending on the application settings of your computer, the product will turn off after saving
the images to your computer.
You can transfer images from the product to only one computer at a time.
If you want to transfer images to another computer, connect the product and the computer
via a USB connection and follow the instructions in “PlayMemories Home.”
Related Topic
Installing “PlayMemories Home”
WPS Push
Access Point Set.
Notes on use
4-477-079-12(1)
Copyright 2013 Sony Corporation
Help Guide
How to Use
To Next Page
Loading...
