Cyber-shot User Guide
Print
Search
Before Use
Shooting
Viewing
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions/About this camera
Contents list
Top page > Changing settings > Setup menu > Upload Settings
Upload Settings
Transferring image data using the Eye-Fi card
Sets whether to use the upload function of an Eye-Fi card (commercially available), when you use the Eye-Fi card with this camera.
[Upload Settings] is displayed only when the Eye-Fi card is inserted in the camera.
1. MENU
2 [Upload Settings] desired mode
On
Uses the upload function.
The Eye-Fi mode display icon on the screen will change depending on the communication
mode of the Eye-Fi card.
: Eye-Fi card is in standby mode. There is no image to be sent.
: Eye-Fi card is in upload standby mode.
: Eye-Fi card is in connecting mode.
: Eye-Fi card is uploading images.
: An error has occurred.
Off Does not use the upload function.
Notes
● As of June 2012, Eye-Fi cards are sold in the U.S.A., Canada, Japan and some countries in the European Union.
● For more information on the Eye-Fi card, contact the manufacturer or seller of Eye-Fi cards directly.
● Eye-Fi cards are permitted only in the countries and regions in which they were purchased. You may be held liable due to local restrictions.
● The Eye-Fi card has a wireless LAN function. Do not insert the Eye-Fi card where wireless LAN is prohibited, such as while aboard an airplane. If
the Eye-Fi card is inserted, set [Upload Settings] to [Off]. When the uploading function of the Eye-Fi card is set to [Off],
is displayed on
the screen.
Transferring image data using the Eye-Fi card
1. Set the wireless LAN access point settings or the transferring direction settings of the Eye-Fi card.
For details, refer to the operating instructions supplied with the Eye-Fi card.
2. After the settings are finished, insert the Eye-Fi card into the camera, and shoot the images.
The recorded images are automatically transferred via wireless LAN to a PC, etc.
Notes
● When uploading image data, the Auto power-off function is not available.
● If the (error) icon is displayed, eject and re-insert the Eye-Fi card, or turn the power of the camera off and on again. If the (error)
icon is still displayed, the Eye-Fi card may be corrupted. For details, contact Eye-Fi, Inc.
● Wireless LAN communication may be interrupted by other communication devices. If data reception is insufficient, move the camera closer to the
access point.
● Some Eye-Fi cards have an “Endless Memory Mode.” This product does not support “Endless Memory Mode.” Make sure that Eye-Fi cards that
you insert into this product have “Endless Memory Mode” turned off. For details on setting “Endless Memory Mode”, refer to the operating
instructions supplied with the Eye-Fi card.
Back to top
Copyright 2012 Sony Corporation
http://esupport.sony.com/docs/dvimag/DSCRX100_guide/en/contents/06/04/07/07.html7/26/2012 10:57:19 PM
To Next Page
Loading...
