Sony Cyber-shot DSC-RX100 - Page 77

DSC-RX100 | Autofocus Area | Cyber-shot User Guide
1. Use the control wheel to adjust the position of the AF range finder frame where you want to focus, then press .
To reset the setting, press
again.
Notes
● Once you change the focusing area, the AF range finder frame you set up is cleared.
Related Topic
Tracking focus
Still shooting menu items not available in some REC modes
Back to top
Copyright 2012 Sony Corporation
http://esupport.sony.com/docs/dvimag/DSCRX100_guide/en/contents/04/02/09/09.html (2 of 2)7/26/2012 10:54:06 PM