Sony Cyber-shot DSC-RX100M3 - Front Cabinet Section

DSC-RX100M3/RX100M3G_L2
2-8
2-1-5. FRONT CABINET SECTION
ns : not supplied
Ref. No. Part No. Description
Ref. No. Part No. Description
201 A-2059-645-A SERVICE, RING RETAINER ASSY
202 4-528-648-01 SHEET A, MANUAL RING
203 4-478-874-02 RING, MANUAL
204 4-478-875-01 RING, LENS (Note 1, 2)
205 A-2059-644-A SERVICE, CAB (FRONT) ASSY
206 4-534-038-01 SHEET, MICROPHONE BLIND
207 4-541-618-01 TAPE (FR), CONDUCTIVE
208 X-2588-291-1 INNER ASSY, CABINET (UPPER)
209 4-534-036-01 REINFORCEMENT (R), PLATE
210 4-534-037-01 REINFORCEMENT (R), ADSHEET
211 4-433-889-01 WINDOW (500), AF
212 4-528-650-01 SHEET, SENSOR
#302 3-703-816-18 SCREW (M1.4X3.5), SPECIAL HEAD
Note
Note 1: Refer to “Assembly-2: Notes on installing the Lens Ring” when
assembling.
Note 1: 組立時は“Assembly-2: Notes on installing the Lens Ring”を参照
してください。
Screw
#302: M1.4 X 3.5
3.5
1.4
(Silver)
3-703-816-18
#302
202
201
212
203
202
205
207
211
208
210
209
204
206
206
ns
ns
(Note1, 2)
Note 2
:
The part of Ref. No. 204 Lens ring varies in specification by the part number suffix. When replacing,
be careful of the following list.
Ref. No. 204 の Lens ring は部品番号の末尾によって部品の仕様が異なるため，交換するときは以下
の項目に注意してください。
LENS RING SHEET (MR), CONDUCTIVE
Suffix : -01, -02
部品番号の末尾が「-01」，「-02」
necessary (
*
1)
必要（
*
1）
Suffix : -03
(or later)
部品番号の末尾が「-03」
（またはそれより新しい）
unnecessary
不要
*1: If there is a wobble when the lens ring is assembled with manual ring retainer assy, MR conductive
sheet is needed.
*
1: Lens ring を Manual ring retainer assy と組み合わせた時に，ガタつきがある場合は MR
conductive sheet が必要になります。
SHEET (MR), CONDUCTIVE
(4-545-274-01)
Conductive Sheet (MR)
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.1 2015.01
SYSSET
2018/10/1703:17:13(GMT+09:00)