Sony Cyber-shot DSC-RX100M3 - Charging by connecting to a computer

Back Back to Top Print
Go to Page Top
Digital Still Camera
DSC-RX100M3
Charging by connecting to a computer
The battery pack can be charged by connecting the camera to a computer using a micro USB cable.
1. Turn off the product, and connect to the USB terminal of the computer.
Note
Note the following points when charging via a computer:
If the product is connected to a laptop computer that is not connected to a power source, the laptop battery level
decreases. Do not charge for an extended period of time.
Do not turn on/off or restart the computer, or wake the computer from sleep mode when a USB connection has been
established between the computer and the camera. Doing so may cause a malfunction. Before turning on/off or restarting
the computer, or waking the computer from sleep mode, disconnect the camera from the computer.
Proper operation cannot be guaranteed on all types of computers.
No guarantees are made for charging using a custom-built computer or a modified computer.
The camera may not operate correctly when other USB devices are used at the same time.
Related Topic
Help Guide
How to Use
127