Back Back to Top Print
Go to Page Top
Digital Still Camera
DSC-RX100M3
Using the control wheel
You can select setting items by turning or pressing the top/bottom/right/left side of the control wheel. Your selection is
determined when you press on the center of the control wheel.
The DISP (Display Setting), (Exposure Comp./Photo Creativity), / (Drive Mode), (Flash Mode)
functions are assigned to the top/bottom/left/right sides of the control wheel. You can assign selected functions to the
left/right sides of the control wheel or to the in the center.
During playback, you can display the next/previous image by pressing the right/left side of the control wheel or by
turning the control wheel.
Related Topic
Help Guide
How to Use
To Next Page
Loading...
