Back Back to Top Print
Go to Page Top
Digital Still Camera
DSC-RX100M3
Spd Priority Cont.
The product continues to shoot as long as the shutter button is pressed. You can continuously shoot at a rate faster
than that of [Cont. Shooting].
1. MENU→ (Camera Settings) → [Drive Mode] → [Spd Priority Cont.].
Note
Between continuous shooting frames, an image of each frame is immediately displayed.
Hint
In [Spd Priority Cont.] mode, the focus is fixed when you press the shutter button halfway down for the first image,
and the focus is fixed after that. However, the exposure value is adjusted for each image. To use the same
exposure for subsequent shots, change the following settings.
The exposure of the first shot is determined when you press the shutter button halfway down. The exposure setting
for the first shot is used for subsequent shots.
Set [ AEL w/ shutter] to [Auto] or [Off].
Notes on use
4-539-041-13(1)
Copyright 2014 Sony Corporation
Help Guide
How to Use
To Next Page
Loading...
