Back Back to Top Print
Go to Page Top
Digital Still Camera
DSC-RX100M3
Multi Frame NR
The product automatically shoots multiple images continuously, combines them, reduces the noise, and records them
as one image. With multi frame noise reduction, you can select larger ISO numbers than the maximum ISO sensitivity.
The image recorded is one combined image.
1. MENU → (Camera Settings) → [ISO] → [Multi Frame NR].
2. Press the right side of the control wheel to display the setting screen, then select a desired value using the
top/bottom side of the control wheel.
Note
When [ Quality] is set to [RAW] or [RAW & JPEG], this function cannot be used.
The flash, [D-Range Opt.], and [Auto HDR] cannot be used.
You cannot set [Multi Frame NR] when [Picture Effect] is set.
Hint
You can change the automatically set range of ISO sensitivity in the [ISO AUTO] mode under [Multi Frame NR].
Select [ISO AUTO] under [ISO] and press the right side of the control wheel, and set the desired values for [ISO
AUTO Maximum] and [ISO AUTO Minimum]. The values for [ISO AUTO Maximum] and [ISO AUTO Minimum] are
also applied when shooting in [ISO AUTO] mode under [Multi Frame NR].
Notes on use
4-539-041-13(1)
Copyright 2014 Sony Corporation
Help Guide
How to Use
To Next Page
Loading...
