Back Back to Top Print
Go to Page Top
Digital Still Camera
DSC-RX100M3
File Number
Selects how to assign file numbers to recorded images.
1. MENU → (Setup) → [File Number] → desired setting.
Menu item details
Series (default setting):
Even if you change the recording destination folder or change the memory card, the product continues to assign
numbers to files in sequence.
(If there is a larger file number on the new memory card than the latest image file, a number one higher than the
largest number is assigned.)
Reset:
The product resets numbers when a file is recorded in a new folder and assigns numbers to files starting with “0001.”
(When the recording folder contains a file, a number one higher than the largest number is assigned.)
Notes on use
4-539-041-13(1)
Copyright 2014 Sony Corporation
Help Guide
How to Use
To Next Page
Loading...
