Menu item details
Standard (default setting):
Zooms in/out smoothly when you operate the zoom by turning the control ring.
Step:
Zooms in/out at certain angle steps when you operate the zoom by turning the control ring.
Note
In the following situations, the zoom function activates as if [Zoom Func. on Ring] is set to [Standard],
even if it is set to [Step].
When using the W/T (zoom) lever to change the zoom scale.
When recording movies.
When using zoom functions other than the optical zoom.
When the shooting mode is set to something other than [Intelligent Auto] or [Superior Auto], assign
the [Zoom] function to the control ring before using the control ring.
[43] How to Use Using shooting functions Using the flash
Using flash
In dark environments, use the flash to light up the subject while shooting and to prevent camera-shake.
When shooting against the sun, use the flash to lighten the image of the backlit subject.
1. Press the (Flash pop-up) slide switch to pop up the flash.
2. Press the shutter button fully down.
When you do not use the flash
When not using the flash, press it back into the camera body.
To Next Page
Loading...
