Establishes an MTP connection between this product, a computer, and other USB devices. Windows 7 or
Windows 8 computers are connected in MTP, and their unique functions are enabled for use.
Note
If Device Stage* is not displayed with Windows 7 or Windows 8, set [USB Connection] to [Auto].
* Device Stage is a menu screen used to manage connected devices, such as a camera (Function of
Windows 7 or Windows 8).
[169] How to Use Changing settings Setup menu
USB LUN Setting
Enhances compatibility by limiting of USB connection functions.
1. MENU → (Setup) → [USB LUN Setting] → desired setting.
Menu item details
Multi (default setting):
Normally, use [Multi].
Single:
Set [USB LUN Setting] to [Single] only if you cannot make a connection.
[170] How to Use Changing settings Setup menu
USB Power Supply
Sets whether to supply power via the micro USB cable when the product is connected to a computer or
an USB device.
1. MENU → (Setup) → [USB Power Supply] → desired setting.
Menu item details
On (default setting):
Power is supplied to the product via a micro USB cable when the product is connected to a computer,
etc.
Off:
Power is not supplied to the product via a micro USB cable when the product is connected to a
computer, etc.
To Next Page
Loading...
