Great user manuals database on UserManuals.info
Firmware Update Manual
for Sony Cyber-shot digital still cameras - DSC-T1
The term “Firmware” refers to the software in your Cyber-shot camera. You can update this
software to solve problems or to add new functions to your still camera, by basically downloading a
new firmware-file, copying it onto Memory Stick Duo / Memory Stick PRO Duo, and inserting this
Memory Stick Duo/ Memory Stick Pro Duo into the camera. It is not possible to return to a
previous firmware version after updating this firmware. By continuing this update process
and downloading and updating this firmware, you acknowledge that you are aware and
understand that this update cannot be reversed. In case of any problem, please contact
your local Sony Service Center.
Here’s how.
Before you start reading these instructions, check out if your PC is equipped either with a Memory
Stick slot/ Memory Stick adapter or with a USB plug.
PC with Memory Stick slot or Memory
Stick adapter
• In case your PC features a Memory
Stick slot or Memory Stick adapter,
always read the left column.
PC with USB plug only (via the supplied
cradle station)
• In case your PC features a USB-plug
but no Memory Stick slot or Memory
Stick adapter, always read the right
column...
...whenever a line is separating the page into two columns, as shown above.
What you need...
• A Cyber-shot camera with all-mains set (originally supplied AC power adapter, AC-LM5)
Without using AC adapter, it can lead to a major defect in your Cyber-shot camera,
which is not covered by the warranty.
• A formatted Memory Stick Duo / Memory Stick PRO Duo.
If the Memory Stick is not new, or not formatted by your camera, problems may occur.
• A PC with Internet access and
• Memory Stick slot / Memory Stick
adapter
(sample image)
USB port via the supplied cradle
(sample image)
To Next Page
Need help?
General
