13
DSC-T3/T33 2-548-269-11(1) [OpenType FONT]
How to remove the camera holder
for tripod
Press the tabs and pull off the camera
holder for tripod as illustrated, then
disconnect the camera from the Cyber-shot
Station.
• Use a tripod with a screw length of less than
5.5 mm (7/32 inch). You will be unable to
firmly secure the Cyber-shot Station to tripods
having longer screws, and may damage the
Cyber-shot Station.
• Attach the tripod so that the camera is stable.
If you shoot with the camera in an unstable
condition, the camera may fall, resulting in
damage or malfunction.
• Be sure to turn off the camera before you
connect the camera to the Cyber-shot Station
or disconnect the camera from the Cyber-shot
Station.
• Do not disconnect the camera from
the Cyber-shot Station during the
USB connection, as the data may be
corrupted.
To cancel the USB connection, see
on page 92 (Windows) or on page
103 (Macintosh).
To Next Page
Loading...
