Sony Cyber-shot DSC-T3 - Shooting Three Images with the Exposure; Exposure Bracket; Before Operation

63
DSC-T3/T33 2-548-269-11(1) [OpenType FONT]
Advanced still image shooting
Before operation
When shooting still images, set
(Camera) in the menu to other than [Auto]
(pages 53 and 120).
Control button
Mode switch
MENU
 Set the mode switch to or
.
 Press MENU.
The menu appears.
 Select (Metering Mode)
with /, then select the
desired metering mode with
/.
 When selecting [Spot] in step
, position the spot metering
cross hair on one point of the
subject you want to shoot.
60min
VGA
F3.5250
98
FINE
SAF
101
P
Spot metering
cross hair
• When using spot metering, to focus on the
metering position, setting  (Focus) to
[Center AF] is recommended (page 57).
Shooting three
images with the
exposure shifted
— Exposure Bracket
The Exposure Bracket function records a
series of three images with the exposure
values automatically shifted. This lets
you select the image with the appropriate
exposure after recording when you are
unable to shoot good pictures depending
on the brightness of the subject.
Before operation
Set (Camera) in the menu to other than
[Auto] (pages 53 and 120).
Control button
Mode switch
MENU