90
DSC-T3/T33 2-548-269-11(1) [OpenType FONT]
Installing the USB driver
When using Windows XP, you need not
install the USB driver.
Once the USB driver is installed, you need
not install the USB driver.
Turn on your computer, and
insert the CD-ROM (supplied)
into the CD-ROM drive.
Do not connect your camera to
your computer at this time.
The install menu screen appears.
If it does not appear, double-
click (My Computer)
(PICTUREPACKAGE) in that order.
• When also using the supplied image
utility software “Picture Package”,
click [Picture Package]. The USB
driver will be installed when
“Picture Package” is installed (page
97).
• When the computer is in use, shut
down all application software
before you install the USB driver.
Click [USB Driver] on the title
screen.
The “InstallShield Wizard” screen
appears.
Click [Next].
The USB driver installation starts.
When the installation is completed, the
screen informs you of completion.
Click [Yes, I want to restart
my computer now], then click
[Finish].
Your computer restarts. Then, you can
establish USB connection.
Remove the CD-ROM.
To Next Page
Loading...
