Battery eject
lever
IWhen
there is no "Memory
Stick Duo" media inserted
Images are stored in the camera's internal
memory (approximately
11
MB).
To copy images from the internal
memory to a "Memory Stick Duo"
media, insert the "Memory Stick Duo"
media in the camera, touch
lmm!l
~
iii
(Settings)
~
• ("Memory Stick"
Tool)
~
[Copy].
ITo
remove the battery pack
[3
You can also use a "Memory Stick PRO Duo"
media or "Memory Stick PRO-HG Duo"
media with the camera.
For details on the number
of
images/time that
can be recorded, see pages 24, 30, 34. Other
types
of
"Memory Stick" media or memory
card are not compatible with the camera.
"Memory Stick" media
You cannot use a "Memory Stick" media with
the camera.
I To remove the "Memory
Stick Duo" media
I "Memory Stick" media that
you can use
"Memory Stick Duo" media
~=--
Access lamp
Make sure that the access
lamp is not lit, then push the
"Memory Stick Duo" media
in
once.
I Checking the remaining
battery charge
A remaining charge indicator appears on
the LCD screen.
High Low
• Never remove the "Memory Stick Duo"
media/battery pack when the access lamp is
lit. This may cause damage to data in the
"Memory Stick Duo" media/internal
memory.
• It takes about one minute until the correct
remaining charge indicator appears.
• The remaining charge indicator may not be
correct under certain circumstances.
•
If
the NP-FD I battery pack (sold separately)
is used, the minute display is also shown
after the remaining charge indicator.
•
If
the camera is running on and you do not
operate the camera for about one minute, the
LCD screen becomes dark.
•
If
the camera is running on and you do not
operate the camera for about two minutes,
the camera turns
off
automatically (Auto
power-off function).
15
GB