Sony Cyber-shot DSC-TX1 - Stage 2: Importing images to your computer using PMB; Stage 3: Viewing PMB Guide

I Stage 2: Importing images to your computer using "PMB"
1
Insert a fully charged battery pack to the camera, then press
the [E (Playback) button.
2 Connect the camera to your computer.
"Connecting..." appears on the screen of the camera.
~ <D., T •.. 0 a U.SB ia.,Ck
~~
Cable for multi-use _If
terminal
•r
USIl
} is displayed on the screen during the communication session. Do not operate the
computer while the indicator is displayed. When the indicator changes to
I:lSB , you can
start using the computer again.
3 Click the [Import] button.
For details, see the "PMB Guide".
I Stage 3: Viewing "PMB Guide"
1
Double-click the ti' (PMB Guide)
icon on the desktop.
• To access the "PMB Guide" from the start
menu: Click [Start]
--+ [All Programs] --+
[Sony Picture Utility] --+ [Help] --+ [PMB
Guide].
44
GB
• Do not disconnect the cable for multi-use terminal from the camera while the camera is operating
or while "Accessing
... " appears on the screen of the camera. Doing so may corrupt the data.
• When using a battery with little remaining charge, you may not be able to transfer the data or the
data may be corrupted. Using the AC-LS5KJAC-LS5 AC Adaptor (sold separately) and the USB/
AVIDC
IN Cable for multi-use terminal (sold separately) is recommended.