Cyber-shot User Guide
Print
Operation Search
Before Use
Shooting
Viewing
Using 3D Functions
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions / About this camera
Contents list
Top page > Changing settings > Main Settings > USB Connect Setting
USB Connect Setting
Selects the USB mode when connecting the camera to a computer or a USB device using the
multi-use terminal USB cable.
1. MENU (Settings) (Main Settings) [USB Connect Setting] desired
mode
Auto
Depending on the computer or other USB devices you connect to the camera,
the connection mode is automatically selected from [MTP] or [Mass Storage].
When you use Windows 7, [MTP] is selected and Windows 7-specific functions
become available.
MTP
Establishes a MTP connection between the camera and a computer or other
USB devices.
When you use Windows 7, [MTP] is selected and Windows 7-specific functions
become available.
When you use other operation systems (Vista/XP, MacOS X), the AutoPlay
Wizard appears, and the still images in the recording folder on the camera are
imported to the computer.
Mass
Storage
Establishes a Mass Storage connection between the camera and a computer or
other USB device.
Note
If Device Stage* does not appear when connecting the camera to a Windows 7, set [USB
Connect Setting] to [Auto].
* Device stage is a manageable menu (Windows 7-specific function) for camera connection, etc.
Back to top
Copyright 2011 Sony Corporation
To Next Page
Loading...
