Inserting the battery pack/a memory card
(sold separately)
1 Open the cover.
2 Insert a memory card
(sold separately).
With the notched comer ['acing as
illustrated, insert the memery card
until it clicks into place.
the correct direction.
3 Insert the battery pack.
Align the battery pack with the
guide inside the battery insertien
slet. Then, pressing the battery eject
lever with the edge of the battery
pack in the direction of the arrow,
insert the battery pack until the
battery eject lever locks into place.
Battery eject lever
4 Close the cover.
Securely close the battery cover
until yeu hear the slide lock on the
cever catch in place and se that the
yellow mark under the slide lock can
no longer be seen.
• If' foreign matter such as sand gets
inside the cever, the sealing gasket may be scratched and it may cause a
malfunctien (page 8).
GB
17
To Next Page
Loading...
