100
Viewing images
The date and time are
recorded incorrectly.
• The date and time are not set correctly. p Set the correct date and time (pages 18 and 115).
The F value and shutter
speed flash when you
press and hold the shutter
button halfway down.
• The exposure is incorrect. p Correct the exposure (page 54).
Symptom Cause Solution
Symptom Cause Solution
Your camera cannot play
back images.
• The mode dial is not set to .
• The folder/file name has been changed on your
computer.
• Your camera cannot play back image files
copied from the hard disk of your computer if the
image has been modified.
• The camera is in USB mode.
p Set it to (page 37).
p See page 89.
—
p Cancel USB communication (pages 85 and 94).
The image appears rough
right after playback starts.
• The image may appear rough right after
playback starts due to the image processing.
p This is not a malfunction.
The image does not
appear on the TV screen.
• The video output signal setting of your camera in
the SET UP settings is incorrect.
• The connection is not correct.
p Change the setting (pages 46 and 115).
p Check the connection (page 39).
The image cannot be
played back on a
computer.
— p See page 101.
To Next Page
Loading...
