41
Deleting still images
Deleting images
, Set the mode dial to , and
turn on the camera.
Press b/B on the control
button to select the image you
want to delete.
• Note that you cannot restore deleted images.
, Press (Delete).
The image has not yet been deleted at this
point.
• You cannot delete the protected image
(page 67).
, Select [Delete] with v on the
control button, then press z.
The message “Access” appears, and the
image has been deleted.
To continue and delete other images
Display the image to be deleted with b/B
on the control button. Then, select [Delete]
with v and press z.
To cancel deleting
Select [Exit] with V on the control button,
then press z.
1
BACK/NEXT
10:30
PM
2005 1 1101-0002
2/9
VOLUME
VGA
101
2
Delete
Exit
VGA
2/9
101
BACK/NEXT
3
Delete
Exit
BACK/NEXT
VGA
2/9
101
Deleting still image
To Next Page
Loading...
