47
Recording/Playback
When recording in 5.1ch surround
sound, attach the supplied surround
microphone to your camcorder.
Without a surround microphone, your
camcorder records in 2ch sound.
• is displayed on the screen during 5.1ch
recording/playback. 5.1ch sound is converted to
2ch when played back on your camcorder.
Dolby Digital 5.1 Creator, 5.1ch surround
sound Glossary (p.146)
Recording with the supplied
microphone
Firmly attach the ECM-L100 surround
microphone (supplied) to the Active
Interface Shoe
2 on the camcorder in the
direction of the arrow.
When the microphone is correctly attached
to your camcorder, appears on the
screen.
To detach the microphone, slide it in the
opposite direction of the arrow in the
illustration above.
• Do not hold your camcorder by the microphone.
This may cause a malfunction.
• Because each supplied microphone is tuned at the
factory with one camcorder, another microphone
of the same model cannot record properly in 5.1ch
surround sound with your camcorder.
• If your supplied microphone is lost or damaged,
contact your Sony dealer or local authorized Sony
service facility. You must also leave your
camcorder with us so that we can tune your new
or repaired microphone.
To record in dark places (NightShot
plus)
.......................................... 3
Set the NIGHTSHOT PLUS switch 3 to
ON. ( and [”NIGHTSHOT PLUS”]
appear.)
• To record an image brighter, use Super NightShot
plus function (p.73). To record an image brighter
in dim light, use Color Slow Shutter function
(p.73).
• The NightShot plus and Super NightShot plus use
infrared light. Therefore, do not cover the infrared
port 4 with your fingers or other objects.
• Remove the conversion lens (optional).
• Adjust the focus manually ([FOCUS], p.72) when
it is hard to focus automatically.
• Do not use these functions in bright places. This
may cause a malfunction.
To adjust the exposure for backlit
subjects (BACK LIGHT).............. 7
To adjust the exposure for backlit subjects,
press BACK LIGHT 7 to display .. To
cancel the back light function, press BACK
LIGHT again.
To adjust the focus for an off center
subject................................. 6
See [SPOT FOCUS] on page 72.
To fix the exposure for the selected
subject................................. 6
See [SPOT METER] on page 70.
To Next Page
Loading...
Need help?
General
