212
Specifications
Appendix
For the functions that can be assigned to pins 1 to 16, see
“GPI Input Settings” (page 163).
REMOTE (1 to 3) connector (D-sub 9-pin, female)
EDITOR connector (D-sub 9-pin, female)
BKDF-901/902 control panel
EXT DISPLAY connector (HD-D-sub 5-pin,
female)
MAINTENANCE connector (D-sub 9-pin, male)
Provided for inspection / maintenance. Not used for
operating this system.
Pin No. Signal
1 GPI IN 1
2 GPI IN 2
3 GPI IN 3
4 GPI IN 4
5 GPI IN 5
6 GPI IN 6
7 GPI IN 7
8 GPI IN 8
9 GPI IN 9
10 GPI IN 10
11 GPI IN 11
12 GPI IN 12
13 GPI IN 13
14 GPI IN 14
15 GPI IN 15
16 GPI IN 16
17 GND
18 GND
19 GND
20 GND
21 GND
22 GND
23 GND
24 GND
25 GND
Pin No. Signal Function
1 FG Frame ground
2 R– Receive data (–)
3 T+ Transmit data (+)
4 SG Signal ground
5 – Not used
6 SG Signal ground
7 R+ Receive data (+)
8 T– Transmit data (–)
9 FG Frame ground
Pin No. Signal Function
1 FG Frame ground
2 T– Transmit data (–)
3 R+ Transmit data (+)
4 SG Signal ground
5 – Not used
6 SG Signal ground
7 T+ Transmit data (+)
8 R– Receive data (–)
9 FG Frame ground
Pin No. Signal Function
1 RED Video signal (Red)
2 GREEN Video signal (Green)
3 BLUE Video signal (Blue)
4 – Not used
5 GND Signal ground
6 GND Signal ground
7 GND Signal ground
8 GND Signal ground
9 – Not used
10 GND Signal ground
11 – Not used
12 – Not used
13 H SYNC Horizontal synchronizing signal
14 V SYNC Vertical synchronizing signal
15 – Not used
To Next Page
Loading...
