Sony DSC-F717 - Auto White Balance 5800 K Check 2; Auto White Balance 5800 K Check 3

DSC-F717
6-26
17. Auto White Balance 5800K Check 3
RadarW
RadarW
RadarW
RadarW
RadarW
Mode CAMERA
Subject Clear chart
(Standard picture frame with the
zoom lens at WIDE end)
Measurement Point Displayed data of page: F, address
9A, 9B
Measuring Instrument Adjusting remote commander
Specified Value 1 23 to 9B
Specified Value 2 00 to 30, DA to FF
Note 1: Perform this check after “Auto White Balance 5800K
Check 2” without a break.
Note 2: Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Checking method:
Order Page Address Data Procedure
1
“Auto White Balance 5800K
Check 2” is completed.
2F 9A
Check that the data specified
value 1.
3F 9B
Check that the data specified
value 2.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1
Perform “Auto White
Balance 3200K Check 1”.
16. Auto White Balance 5800K Check 2
RadarWRadarWRadarW
Mode CAMERA
Subject Clear chart
(Standard picture frame with the
zoom lens at WIDE end)
Measurement Point Displayed data of page: F, address:
94, 95
Measuring Instrument Adjusting remote commander
Specified Value 1 11 to 4D
Specified Value 2 00 to 1D, DC to FF
Note 1: Perform this check after “Auto White Balance 5800K
Check 1” without a break.
Note 2: Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Checking method:
Order Page Address Data Procedure
1
“Auto White Balance 5800K
Check 1” is completed.
2
Remove the C14 filter on the
lens.
3F 94
Check that the data specified
value 1.
4F 95
Check that the data specified
value 2.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1
Perform “Auto White
Balance 5800K Check 3”.