DSC-F717
6-39
2. LCD Initial Data Input (2)
Mode PLAY
Signal Arbitrary
Adjustment Page B
Adjustment Address 3A to 3F
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: B, and enter the data given in the following table.
Note: Press the PAUSE button each time the data are set, as the
data are written to non-volatile memory (EEPROM).
Address Data Remark
3A 57
3B FE
3C 02
Fixed data
3D 5A
3E 00
3F 01
Processing after Completing Adjustments:
1) Select page: 0, address: 01, and set data: 00.
1. LCD Initial Data Input (1)
Mode PLAY
Signal Arbitrary
Adjustment Page A
Adjustment Address 80 to 8F, A3
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, and enter the data given in the following table.
Note: Press the PAUSE button each time the data are set, as the
data are written to non-volatile memory (EEPROM).
Address Data Remark
80 7A
Fixed value
81 22
82 2D VCO Adjustment (NTSC mode)
83 3C VCO Adjustment (PAL mode)
84 63 V-COM Adjustment
85 16 D Range Adjustment
86 B8 Fixed value
87 6B V-COM Level Adjustment
88 90
White Balance Adjustment
89 83
8A 0A Contrast Adjustment
8B 00
Fixed value
8C 2F
8D 31
8E 80
8F 1F
A3 06
Processing after Completing Adjustments:
1) Select page: 0, address: 01, and set data: 00.
To Next Page
Loading...
