Sony DSC-F717 - Jog Dial Check; Switch Check (1)

DSC-F717
6-50
5. Jog Dial Check
Page 2 Address 81
Using method:
1) Set the mode dial to any position other than “SET UP’”.
2) Select page: 2, address: 81.
3) By discriminating the upper digit of the data, the rotation of
the control dial can be discriminated.
3. Mode Dial Check (1)
Page 2 Address 90
Data Function
00 to 14 S
15 to 3D A
3E to 67 M
68 to A8 SCN
A9 to D0 MOVIE
D1 to FF CAMERA
Using method:
1) Select page: 2, address: 90.
2) By discriminating the bit value of dispaly data, the state of the
switches can be discriminated.
4. Mode Dial Check (2)
Page 2 Address 80, 81
Address Bit Function
When bit When bit
value=1 value=0
80 1 PLAY others PLAY
81 4 SET UP others SET UP
Using method:
1) Select page: 2, address: 80 and 81.
2) By discriminating the bit value of dispaly data, the state of the
switches can be discriminated.
6. Switch Check (1)
Page 2 Address 80
Bit Function When bit value=1 When bit value=0
0 POWER SW OFF ON
1 PLAY (Mode Dial) others PLAY
2
3
SHUTTER SW
OFF ON
(
PW51050 block
)
S401
4
XSHUTTER LOCK SW
OFF ON
(
PW51050 block
)
S401
5
MEMORY STICK IN SW
OUT IN
(MS Socket)
Using method:
1) Select page: 2, address: 80.
2) By discriminating the bit value of dispaly data, the state of the
switches can be discriminated.
Jog dial
(PW51050 block (S403))
When rotated upward.
When rotated downward.
Upper digit of the data
...
→ 3 → B → F → 7 → 3 →
...
...
→ 3 → 7 → F → B → 3 →
...