6-9
DSC-F828
1-2-2. DSC-F828 C1 MATRIX ADJ
1. Application Environment
OS: Windows 98/98SE/Me/2000/XP
RAM: 256MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
2. Installation Method
Extract the file compressed in the ZIP format (828matrix.zip). Ex-
ecute the extracted file (setup.exe), and the installer will start. In-
stall the program following the instructions given on the installer
screen.
3. Notes When Using the DSC-F828 C1 MATRIX ADJ
1) The SEUS must be installed in the PC.
2) The HASP Key for SEUS must be connected to the USB con-
nector. The program will not start unless the HASP Key is
connected.
4. Starting Method of DSC-F828 C1 MATRIX ADJ
Click the [Start] button on the task bar, and click the [DSC-F828
C1 MATRIX ADJ] from the [Programs], and the program will
start.
5. Screen and Function of Each Button of DSC-F828
C1 MATRIX ADJ
Fig. 6-1-9
1 [Connect] button
Makes connection to the camera and switches the camera to
the adjustment mode. In the case of successful connection to
the camera, the indication at the part A changes to “Connected”
and the [Color Shading Adjustment] button, [Linear Matrix
and AWB Adjustment] button and the [Disconnect] button
become active.
2 [Color Shading Adjustment] button
Starts the Color Shading Adjustment.
3 [Linear Matrix and AWB Adjustment] button
Starts the Linear Matrix and AWB Adjustment.
4 [Disconnect] button
Cancels the connection to the camera.
To Next Page
Loading...
