Sony DSC-F828 - Adjustment Items of LCD System Adjustment; Function of each Button on LCD System; Adjustment Screen; LCD System Adjustments

6-26
DSC-F828
1-6. LCD SYSTEM ADJUSTMENTS
1-6-1. Function of Each Button on LCD System
Adjustment Screen
Click the [LCD SYSTEM ADJUSTMENT] button on the Main
Menu screen, and the “LCD SYSTEM ADJUSTMENT” screen in
Fig. 6-1-63 will appear.
Fig. 6-1-63
1 [To Menu] button
The Main Menu screen comes back.
2 [LCD Adjustment Start] button
“LCD Adjustment” starts.
3 [Reset] button
This button functions same as the Reset button of the camera.
4 [Release Data Setting] button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the LCD adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
43
2
1
1-6-2. Adjustment Items of LCD System Adjustment
The adjustment items of LCD system adjustment are as listed in
Table 6-1-5. The Automatic Adjustment Program executes the ad-
justment items if the LCD Adjustment Start button is clicked.
Button
Adjustment Signal Page Address
Name
LCD Initial Data 8F
20, 21,
Input
23 to 28,
LCD
2A, 2C
Adjustment
VCO adj. Arbitrary 8F 23
Contrast adj. 8F 2C
V-COM adj. 8F 24
White Balance adj. 8F 28, 2A
Table 6-1-5