6-33
DSC-F828
6. Switch check (4)
Page 80 Address 13
Using method:
1) Select page: 80, address: 13.
2) Read the data. By discriminating the data, the state of the switches can be discriminated.
7. Switch check (5)
Page 80 Address 14
Using method:
1) Select page: 80, address: 14.
2) Read the data. By discriminating the data, the state of the switch can be discriminated.
8. Switch check (6)
Page 80 Address 15
Using method:
1) Select page: 80, address: 15.
2) By discriminating the data, the rotation of the control dial can be discriminated.
9. LED, Segment LCD check
Page 20 Address 04
Page 80 Address 12
Page 8E Address FE
Using method:
1) Select page: 00, address: 01, set data: 01.
2) Select page: 20, address: 04, set data: 02.
3) Select page: 8E, address: FE, set data: 20.
4) Select page: 80, address: 12, set data: 01.
6) Check that all LED (Power, Charge, Tally, Access, Segment LCD back light) are lit.
7) Select page: 20, address: 04, set data: 08.
8) Check that all segment of the segment LCD are lit.
9) Select page: 20, address: 04, set data: 00.
10) Select page: 80, address: 12, set data: 00.
11) Select page: 8E, address: FE, set data: 00.
12) Select page: 00, address: 01, set data: 00.
Function When data = 00 When data = 01 When data = 02
Shutter button (XAE LOCK SW) (Control switch block (TOP))
OFF ON ON
Shutter button (XSHTR ON SW) (Control switch block (TOP))
OFF OFF ON
Function When data = 00 When data = 01
CF COVER switch (Control switch block (CENTER)) Open Close
Control dial (Control switch block (CENTER)) Data
When rotated in the left direction. 01
When rotated in the right direction. 02
To Next Page
Loading...
