Sony DSC-F828 - Control Switch Block (MID), Lcd Unit; Control Switch Block (Under)

2-9
DSC-F828
2-11.CONTROL SWITCH BLOCK (UNDER)
1 Three screws (M1.7 × 3),
lock ace
7 Control switch block
(under)
5 Cabinet (rear) assembly
2 Control switch block
(mid)(10p)
3 Block light guide plate (6P)
4 LCD module (24P)
6 Tape (A)
Caution
Tape (A)
Control switch block (under)
Caution
Install the control switch block (under) in the
cabinet (rear) assembly so that the tip of the
control switch block (under) go under the
bottom of the control switch block (mid).
2-12.CONTROL SWITCH BLOCK (MID), LCD UNIT
1 Five screws (M1.7 × 3),
lock ace
7 Two screws (M1.7 × 3),
lock ace
2 Open the CF lid
8 CF lid assembly
3 Control switch block (mid)
5 Block light guide plate
Block light guide plate
6 LCD unit
4 Tape (A)
Caution
Tape (A)