45
Deleting still images
, Press (delete).
Select [OK] by moving the
multi-selector to B, then press
the center.
“Access” appears on the screen and all of
the images with marks will be deleted.
To cancel the deletion
Select [Exit] by moving the multi-selector
to b, then press the center.
4
Exit OKDelete
To delete all the images in the folder
In Step 2, Select [All In This Folder] by
moving the multi-selector to B, then press
the center. Next, select [OK], then press the
center. All of the unprotected images in the
folder are deleted. To cancel the deletion,
select [Cancel], then press the center.
Formatting a
recording medium
,
Insert the recording medium
you want to format into the
camera. Select the recording
medium with the /CF
switch. Set the mode dial to SET
UP, and turn on the camera.
• The term “formatting” means preparing a
recording medium to record images; this
process is also called “initialization.”
• The “Memory Stick” is already formatted, and
can be used immediately.
• Be sure to format the Microdrive/CF card using
this camera. Otherwise, satisfactory
performance may not be obtained.
• When you format a recording medium,
be aware that all of the data in the
recording medium will be permanently
erased. Protected images are also
erased.
1
/CF
switch
To Next Page
Loading...
