Shoots a total of three images, each with a different color tones according to the selected
settings for white balance, color temperature and color filter.
DRO Bracket:
Shoots a total of three images, each at a different degree of D-Range Optimizer.
[77] How to Use Using shooting functions Selecting a drive mode (Continuous
shooting/Self-timer)
Cont. Shooting
Shoots images continuously while you press and hold down the shutter button.
1. MENU→ (Camera Settings) → [Drive Mode] → [Cont. Shooting].
Hint
To hold the focus and exposure during burst, change the following settings.
The exposure of the first shot is determined when you press the shutter button halfway
down. The exposure setting for the first shot is used for the subsequent shots.
Set [Focus Mode] to [Continuous AF].
Set [
AEL w/ shutter] to [Off] or [Auto].
[78] How to Use Using shooting functions Selecting a drive mode (Continuous
shooting/Self-timer)
Spd Priority Cont.
The product continues to shoot as long as the shutter button is pressed. You can
continuously shoot at a rate faster than that of [Cont. Shooting].
1. MENU→ (Camera Settings) → [Drive Mode] → [Spd Priority Cont.].
Note
Between continuous shooting frames, an image of each frame is immediately displayed.
Hint
In [Spd Priority Cont.] mode, the focus is fixed when you press the shutter button halfway
To Next Page
Loading...
