to your body to warm it up, and insert it in the product immediately before you
start shooting. If there are any metal objects such as keys in your pocket, be
careful of causing a short-circuit.
The battery pack will run down quickly if you use the flash or continuous
shooting function frequently, turn the power on/off frequently, or set the monitor
very bright.
We recommend preparing spare battery packs and taking trial shots before
taking the actual shots.
Do not expose the battery pack to water. The battery pack is not water-
resistant.
Do not leave the battery pack in extremely hot places, such as in a car or under
direct sunlight.
If the battery terminal is dirty, you may not be able to turn on the product or the
battery pack may not be properly charged. In that case, clean the battery by
lightly wiping off any dust using a soft cloth or a cotton swab.
Remaining battery indicator
The remaining battery indicator appears on the screen.
A: Battery level high
B: Battery exhausted
It takes about one minute for the correct remaining battery indicator to appear.
The correct remaining battery indicator may not be displayed under some
operating or environmental conditions.
If you do not operate the product for a certain period of time while the power is
on, the product turns off automatically (Auto power-off function).
If the remaining battery time does not appear on the screen, press the DISP
(Display Setting) button to display it.
How to store the battery pack
To maintain the battery pack’s function, charge the battery pack and then fully
discharge it in the product at least once a year before storing it. Remove the
battery pack from the camera and store the battery in a cool, dry place.
To use the battery pack up, leave the product in slide show playback mode until
To Next Page
Loading...
