[83] How to Use Using shooting functions Adjusting the focus
Measuring the exact distance to the subject
The mark shows the location of the image sensor*. When you measure the
exact distance between the product and the subject, refer to the position of the
horizontal line.
*
The image sensor is the part that converts the light source to a digital signal.
Note
If the subject is closer than the minimum shooting distance of the lens, the
focus cannot be confirmed. Make sure you put enough distance between the
subject and the product.
[84] How to Use Using shooting functions Adjusting the focus
Focus Ring Rotate
Assigns longer-distance and shorter-distance focus to the rotational directions of
the lens ring to which the focus function has been assigned.
1. MENU→ (Custom Settings)→[Focus Ring Rotate]→desired setting.
Menu item details
Left /Right :
To Next Page
Loading...
