Sony DSC-W830 - Lens Block; Installation

DSC-W830
4-7
4-4. LENS BLOCK
4-4-1. Removal and Installation
(1) Ornamental Ring A Replacing Method
Removal
1 Turn on the power switch and extend the lens (TELE end).
2 Detach the battery.
3 Pour a solvent such as alcohol to two gaps A of the Ornamental Ring A with tweezers or a fine-tipped stick as shown below.
4 Turn the Ornamental Ring A clockwise and counterclockwise to detach it.
Note: As for the figure below, this model and the shape of
the main body are different.
Ornamental Ring
A
Solvent
A
Tweezers
5 Disengage the four claws and remove the Barrier Assy.
Barrier Assy
Claws
Claws
Installation
1 Fit the four claws while inserting the Barrier Lever into the hole and attach the Barrier Assy.
Barrier Assy
Claws
Claws
Hole
Barrier
Lever
2
Peel off the release papers of the Barrier Tapes.
3 Install the Ornamental Ring A and press it lightly.
Barrier Tapes
Barrier Assy
Barrier Tapes
Ornamental Ring A