Cyber-shot User Guide
Print
Operation Search
Before Use
Shooting
Viewing
Using 3D Functions
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions/About this camera
Contents list
Top page > Changing settings > Main Settings > Eye-Fi
Eye-Fi
Transferring image data using the Eye-Fi card
Sets whether to use the upload function of an Eye-Fi card (commercially available), when you
use the Eye-Fi card with this camera.
[Eye-Fi] is displayed only when the Eye-Fi card is inserted in the camera.
1. MENU (Settings) (Main Settings) [Eye-Fi] desired mode
On
Uses the upload function.
The Eye-Fi mode display icon on the LCD screen will change depending on the
communication mode of the Eye-Fi card.
: Eye-Fi card is in standby mode. There is no image to be sent.
: Eye-Fi card is in upload standby mode.
: Eye-Fi card is in connecting mode.
: Eye-Fi card is uploading images.
: An error has occurred.
Off Does not use the upload function.
Notes
As of December 2010, Eye-Fi cards are sold in the U.S.A., Canada, Japan and some
countries in the European Union.
For more information on the Eye-Fi card, contact the manufacturer or seller of Eye-Fi cards
directly.
Eye-Fi cards are permitted only in the countries and regions in which they were purchased.
You may be held liable due to local restrictions.
The Eye-Fi card has a wireless LAN function. Do not insert the Eye-Fi card where wireless
LAN is prohibited, such as while aboard an airplane. If the Eye-Fi card is inserted, set [Eye-
Fi] to [Off]. When the uploading function of the Eye-Fi card is set to [Off],
is displayed
on the LCD screen.
Transferring image data using the Eye-Fi card
1. Set the wireless LAN access point settings or the transferring direction settings of the Eye-Fi
card.
For details, refer to the operating instructions supplied with the Eye-Fi card.
2. After the settings are finished, insert the Eye-Fi card into the camera, and shoot the images.
The recorded images are automatically transferred via the wireless LAN to the PC, etc.
Notes
When you use a new Eye-Fi card for the first time, copy the install file of the PC application
written in the Eye-Fi card first, then format the card.
Before using the Eye-Fi card, upgrade the firmware of the Eye-Fi card to the latest version.
For details on version upgrades, refer to the operating instructions supplied with the Eye-Fi
card.
When uploading image data, [Power Save] is not available.
If the
(error) icon is displayed, eject and re-insert the Eye-Fi card, or turn the power of
To Next Page
Loading...
