Sony DSLR-A100 - 2 Disassembly; Disassembly; Discharging of the Main Capacitor Unit

2-1
2. DISASSEMBLY
DSLR-A100_L2
DISCHARGING OF THE MAIN CAPACITOR UNIT
Before disassembly, be sure to discharge the main capacitor unit in the following manner.
SUBSIDIARY MATERIALS
G: Grease B: Bond
G-15 (J-6082-619-A) B-20 (Adhesive (LOCTITE 460)) (Note)
G-85 (J-6082-626-A) B-50 (J-6082-615-A)
G-115 (J-6082-627-A) B-60 (J-6082-616-A)
Short-circuit the capacitor using the discharger
or a resistor of about 200-300Ω/3W.
After discharge, check the voltage.
Note: Use adhesive (LOCTITE 460) or an equivalent article.
Don’t use what becomes white after drying like a quick-
drying glue.