"_" How to use the AEL button in manual mode
While you press _,ndhold the AEL (AE Lock) button, lhe exposure delelmined by tile metcr is locked as tile
standard exposure (0.OEv). Changing the composition on lhe LCD monitor and in the view finder while
holding the AEL button causes the exposure within the spot mctering circle to continually shift to match the
movements and the display indicates the dill?rcncc between the standard exposure determined by the meter
and the exposure within the spot metering circle.
The lollowing illustrations show a case where the set exposure specified by the photographer is 1.0Ev more
than the locked standard exposure determined by the meter. When tfie composition is changed in the
view finder, the exposure within the spot metering circle is 0.7Ev more than the _t exposure, thereby
making il 1.7Ev more than the standard exposure delermined by tile meter.
The exposure specified
by the photographer
__ The exposure within the
spot metering circle
when you recompose
your shot.
Spot metering circle
" 1-2-.1 ,-0--1 --2+
Manual shift
Yen can cbange the sllutter speed and aperiure vahle combinaiion v,'iiboul changing tbe
expogtlre in illanl.l_ll [node.
g
Mode dial
dial
AEL (AE lock) button
(_) Set the mode dial to M.
@ Select a shutter speed and aperture value (page 37).
@ Press and hold the AEL (AE lock) button and turn the contrel dial to select the desired shutter
speed and apellure value combination.
39
To Next Page
Loading...
